Home > Cast Bronze Bearings >

High Strength Bronze Alloy Flanged Sleeve Bearing For Injection Molders

Product Categories

Plain Bush Bearing [16]
Plastic Plain Bearings [14]
Ceramic Plain Bearings [10]
Bi Metal Bearings [34]
Cast Bronze Bearings [73]
Self Lubricating Bearings [50]
Sintered Metal Bearings [5]
Wrapped Bronze Bearing [10]
POM Boundary Lubricating Bearings [34]
Steel Roller Bearings [13]
Rod End Bearing [8]
Spherical Plain Bearings [10]
Deep Groove Ball Bearings [10]
Needle Roller Bearing [10]
Linear Motion Bearings [10]
Taper Roller Bearing [11]

ZHEJIANG TOP BEARINGS CO., LTD.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High Strength Bronze Alloy Flanged Sleeve Bearing For Injection Molders

Name: High Strength Bronze Alloy Flanged Sleeve Bearing For Injection Molders
Brand: TOB Casting Bronze Bearings
Price: 1 USD

Quality High Strength Bronze Alloy Flanged Sleeve Bearing For Injection Molders wholesale

Brand Name : TOB Casting Bronze Bearings

Certification : ISO 16949

Place of Origin : China

MOQ : negotiated

Price : negotiated

Payment Terms : T/T

Supply Ability : negotiated

Delivery Time : negotiated

Packaging Details : Cartons or Pallets

Material : High Strength Bronze With Solid Lubricant

Application : consecutive casting and rolling machines, mine-exploiting equipment, ships, steam engine, injection molders and auto molds, etc.

Types : Cylinder Bearings with Flange

Name : JDB Bearing, OILES 500# Bearing, Solid Lubricating Bearings

Hardness : ≥260 HB

Working Temperature Limits : -40~+300℃

Contact Now

High Strength Bronze Alloy With Solid Lubricant Casting Bronze Flanged Bearings

JDB Bearing is backed with high strength bronze alloy. The surface is regularly and finely machined with sockets in which particular solid lubricant is filled.

Avoid use in seawater.

JDB Bearing Bronze based and processed by turning technics. JDB Bearing can be made oil grooves on the inner surface and outside surface to reach a better lubricating effect. By made mid-sized holes in order and then insert the solid lubricant into the holes in the bronze bushing to apply the bushings under oil-free conditions.

JDB Bearing can be used with rotary, reciprocating shaking motion and movement.

Diamater 31.5mm-63mm hydraulic cylinder is put on the intermediate shaft using fresh products.

JDB Bearing is widely used on consecutive casting and rolling machines, mine-exploiting equipment, ships, steam engine, injection molders and auto molds, etc.

High Strength Bronze Alloy Flanged Sleeve Bearing For Injection Molders

Chemical Compositions

Product NO.	Chemical Compositions
TOB 051	Cu	Zn	Al	Fe	Mn	Si	Ni	Sn	Pb
TOB 051	60~65	22~28	5.0~8.0	2.0~4.0	2.5~5.0	<0.1	<0.5	<0.2	<0.2

Physical and Mechanical Performance

Performance Index		Data	Performance Index			Data
Density	g/cm³	8.2	Hardness		HB	≥260
Linear Expansion Coefficient	10^-5/℃	1.6-2.0	Flexibility Coefficient		KN/mm²	80-120
Heat-conducting Coefficient	W/(m·k)	38-55	Tensility		%	≥2
Tensile Strength	N/mm²	≥850	Friction	Oil Lubrication	μ	0.03
Anti-compact Tenacity	≥KJ/m^3	300-400	Friction	Dry Friction	μ	0.16

Application Condition Limits

Lubrication Conditions		Non- Lubrication	Periodical Lubrication	Consecutive Lubrication
Working Temperature Limits	℃	-40~+300	-40~+150	-40~+150
Max. Load pressure	N/mm²	130	130	130
Max. Linear Velocity	m/s	0.30	0.80	1.25
Max. PV Value	N/mm²·m/s	1.65	3.25	3.25

High Strength Bronze Alloy Flanged Sleeve Bearing For Injection Molders

Product Tags:

aluminum bronze bearings

flanged bronze bearings

High Strength Bronze Alloy Flanged Sleeve Bearing For Injection Molders Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	ZHEJIANG TOP BEARINGS CO., LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!